Comparative Evaluation of Methane Yield from Continuous and Batch Fermentative Processing of Selected Agrowaste

This study investigated the influence of different agrowaste compositions on methane yield in batch and continuous operational modes, highlighting the significance of substrate characteristics in determining the efficiency of methane production. It comparatively assessed the methane yield derived from continuous and batch fermentative processing of the following agrowaste; Cassava peels (A), Maize husks (B), Pig Slurry (C), and composite (D) that represents the co-digestion of the aforementioned A, B & C. Eight digesters were used in all, two anaerobic systems for each substrate, [I.e one operating in a batch mode (1) and the other in a continuous mode (2)]. The proximate properties of the substrates were determined and gas production rates were monitored over the experimental period of 45 days. Gas analysis of the generated gas revealed mainly methane and CO2, with concomitant organic compounds like; Ethanol, Methanol, Acetic Acid, Acetone, etc. Minute quantities of Phenol and Lactic Acid were mainly found in the gas generated from Cassava peels. The average percentage value of Co-digested substrates (D) yielded higher gas volume of 78.263±4.54, followed by C (74.263±4.65), B (70.240±4.38), and A (56.090±3.50). The results also revealed that the continuous fermentative process demonstrated a more stable and consistent methane production rate compared to the batch system, attributed to its steady-state operational mode and continuous substrate feed input. However, modeled graphical results showed that batch fermentation system produced higher gas yield (for all the substrates) between days 29-39 before it recorded a sharp decline curve, attributed to the reduction in substrate availability.